News | August 16, 2018

New LineLink Transfer System: Worry-Free Transfer Performance Up To 15,000 bph

  • LineLink transfer units perform ultra-reliable coupling of products and data
  • Worry-free transfer performance up to 15,000 bph

LineLink transfer systems have been developed for capacities up to 15,000 bph. LineLink DE transfers products from the defeathering line to the evisceration line, while LineLink EC transfers products from the evisceration line to the chilling line. Not only each product, but all information collected on it is transferred too. LineLink automatic inline transfer helps optimize product hygiene and ensures full traceability.

Transfer units mark crucial phases in a processing plant, where different types of shackles are needed for different departments. Certainly when speeds are accelerated to 15,000 bph, processors should be able to rely on flawless transfer. LineLink units ensure such a worry-free performance: they guarantee fast, but hygienic, careful handling without damage to the product, and with no empty shackles downstream.

Ultra-reliable coupling
First, incoming products are located into the system’s units. A large part of the carousel’s circumference is used for positioning products carefully. Then they are conveyed round the system’s carousel to the point where they are guided into the new shackle. Products are now perfectly positioned for downstream operations.

Both lines run at exactly the same speed. Products are transferred on a one to one basis, preventing empty shackles and a higher line speed downstream. In this way products are transferred correctly by both legs and are properly positioned for the next process. Line forces are synchronized electronically by the Stork Active Tension Control (ATC) system. ATC compensates automatically for differing chain stretch on the two lines. Only in this way, both lines always run at precisely the same number of shackles per minute and immaculate coupling can be achieved.

Data transfer
LineLink transfers not only products, but also data. Each individual product transfer is accompanied by transfer of the associated weight and quality data, gathered by assessment systems such as SmartWeigher and IRIS. These data can be used for production order planning and downstream processes. In the defeathering department, this information can be an aid to veterinary inspection with selective unloading. Moreover, the information collected on each product ensures traceability through the entire process.

Combining LineLink with Innova PDS software, processors can monitor and evaluate the transfer performance real-time from a central point. This adds to an even higher traceability.

For more information, visit

SOURCE: Marel Poultry