C-Series Carbon Dioxide Storage Units

This Carbon Dioxide storage unit is designed for balanced weight distribution in areas where placement is a concern. As with all our storage units, maximum efficiency of operation is our first priority. This low-maintenance storage unit has totally enclosed valves, electrical and refrigeration, and may be locked for safety and security. Vaporizer equipment is available. A sleek aluminum factory finish conceals a 4" (10.16 cm) polyurethane insulation which allows for long life and maximum protection. Auxiliary outlets are available for additional liquid and vapor supply needs.

General Specifications

• Pressure vessel: ASME coded for maximum working pressure of 350 psig
  
• Piping: Schedule 80 seamless pipe, 2,000 lbs (907.20 kg) forged steel fittings, ball type valves
  
• Safeties: ASME approved direct spring loaded or pilot operated, sized for unconfined outdoor installation
  
• Insulation: 4" (10.16 cm) Polyurethane
  
• Outer jacket: .063" (0.16 cm) Aluminum
  
• Vaporizers optional: Steam, water or electric, capacities to 6,000 lbs/hr (2721.60 kg/hr)
  
• Liquid level gauge: differential pressure indicator type with 6" (15.24 cm) dial
  
• Pressure gauge: 0 - 600 psig with 6" (15.24 cm) dial
  
• All models use 208/220/230/460 V, 60 Hz, 3 Phase
  
• Control cabinet: .04" (0.1 cm) prefinished aluminum with lockable door
  
• Manway installed for internal inspection and ease in cleaning
  
• Stainless steel nozzles and valves

Note: Safety relief valve removed for shipment due to height requirements on 14-ton (12701 kg) and larger units
Note: All CO2 storage units are manufactured using normalized SA-612 carbon steel plate.

Tomco Equipment Company, 3340 Rosebud Road, Loganville, GA 30052. Tel: 770-979-8000; Fax: 770-985-9179.